Impact Factor:6.549
 Scopus Suggested Journal: Tracking ID for this title suggestion is: 55EC484EE39417F0

International Journal
of Computer Engineering in Research Trends (IJCERT)

Scholarly, Peer-Reviewed, Platinum Open Access and Multidisciplinary




Welcome to IJCERT

International Journal of Computer Engineering in Research Trends. Scholarly, Peer-Reviewed, Platinum Open Access and Multidisciplinary

ISSN(Online):2349-7084                 Submit Paper    Check Paper Status    Conference Proposal

Back to Current Issues

Analytical and Parametric Optimization of Force Transmissibility by Taguchi Method for Double Stage Engine Mountings

G.C.Mekalke, R.R.Kolhapure, , ,
Affiliations
DKTE’S Textile and Engineering Institute, Ichalkaranji
:10.22362/ijcert/2016/v3/i9/48864


Abstract
It is essential to design a warship to avoid detection by submarines or enemy ships. One of the recent techniques used is to mount all vibrant machinery on a double stage vibration isolation system. For high structure-borne noise attenuation there is requirement of two-stage mounting system. The main goal of current research work is to reduce vibration levels from machinery to foundation, and thereby to reduce radiate noise levels from ship hull. The present work deals with the mathematical modeling and parametric optimization of force transmissibility (Ftr) for design of engine foundation system. The vertical vibrations of the system are assumed to be most predominant, and other types of vibrations are neglected. The research work is carried out for finding parameters of mounts and optimizing the same. The analysis is based on discrete system modeling. Taguchi method is used for finding optimal combination of process parameters based on S/N ratio and analysis of variance (ANOVA) is statistical technique to investigate contribution of each process parameters on the performance characteristic. The result shows that spring stiffness is most affecting process parameter.


Citation
G.C.Mekalke, R.R.Kolhapure," Analytical and Parametric Optimization of Force Transmissibility by Taguchi Method for Double Stage Engine Mountings”, International Journal of Computer Engineering In Research Trends, Volume 3, Issue 9, September-2016, pp. 461-470


Keywords : Double stage vibration isolation, Two-degree freedom systems, Taguchi, ANOVA

References
[1] Adigunaa, H, M Tiwaria, and H E Tsengb."Transient Response of a Hydraulic Engine Mount." Scientific Research Laboratory, Center of Automotive Research Oh43210-1107, No.Mi48124 (Dec 2002).
[2] Gaul, L N. "Substructure Behavior of Resilient Support Mounts for Single and Double Stage Mounting Systems." Mechanical Systems and Signal Processing. 5(1991).
[3] Hutton, S G. Optimization of Vibration Mounts Properties for Application to Shipboard Diesel Engines. Technical Report Drea Cr 2000-077,Defence Research Establishment Atlantic, Jan 2001.
[4] Joong, Jae Kim, and Young Kim Heon. "Shape Design of an Engine Mount by a Method of Parameter Optimization." Kwangmyungshi,Kyungki (Department of mechanical
engineering, Kwangweon national university),may 1994: 781-88.
[5] Muravyov, A, and S G Hutton. "Analysis of an Engine-Mount System with Time-Dependent and Velocity Matrices." Univercity of British Columbia, Vancouver. Canada: Department of Mechanical, 14 August 1997.Peter, J, Ran Tian, and K Chris. "A Study of Vibration and Vibration Control of Ship Structures." Marine Structures 22(4) (2009): 730-743.
[6] Ramachandran, T, And K P Padmanaban. "Review On Internal Combustion Engine Vibrations and Mountings." Psna College of Engineering and Technology, Dindigul.
Tamilnadu. 
[7] Singh, R. "Dynamic Design of Automotive Systems: Engine Mounts and Structural Loints."Department of Mechanical Engineering, Ohio State University.
[8] Tao, J S, and G R Liu. "Design optimization of marine engine mount system." journal of sound and vibration 235(3) (2000): 474-494.
[9] Vijayan, V, And T Karthikeyan. "Design and Analysis of Compliant Mechanism for Active Vibration Isolation Using Fea Technique."International Journal of Recent Trends in
Engineering 1, No.5 (May 2009).
[10] Yunhe, Yu, G Naganathan Nagi, and v Dukkipati Rao. "A literature review of automotive vehicle engine mounting systems."Mechanical, Industrial and Manufacturing
Journal (The univercity of Toledo) Ct06430, no.OH43606 (1999).
[11]Durairaj M., Sudharsun D., Swamynathan N.,(2013) “Analysis of Process Parameters in Wire EDM with Stainless Steel using Single Objective Taguchi Method and Multi Objective Grey Relational Grade,” Procedia Engineering, 64 ,868 – 877.
[12]Raghuraman S., Thiruppathi K., Panneerselvam T., Santosh S., (2013)“Optimization of EDM Parameters using  Taguchi Method and Grey Relation Analysis for Mild Steel IS 2026,” International Journal of Innovative Research in Science, Engineering and Technology,2,7,3095-3104.
[13]Dean E., (1991) “Taguchi Approach to Design Optimization for Quality and Cost: An Overview,” Annual Conference of the International Society of Parametric Analysis, 1-9.
[14] Rao R., (2011), “Advanced Modeling and optimization of Manufacturing Processes,”International Research and Development Springer, 1-380.


DOI Link : http://www.dx.doi.org/10.22362/ijcert/2016/v3/i9/48864

Download :
  V3I902.pdf


Refbacks : There is no refbacks

Support Us


We have kept IJCERT is a free peer-reviewed scientific journal to endorse conservation. We have not put up a paywall to readers, and we do not charge for publishing. But running a monthly journal costs is a lot. While we do have some associates, we still need support to keep the journal flourishing. If our readers help fund it, our future will be more secure.

Quick Links



DOI:10.22362/ijcert


Science Central

Score: 13.30





Submit your paper to editorijcert@gmail.com